This riveting plier has been designed to place 3/32”,1/8”,5/32’ & 3/16” diameter blind rivets by just changing the nose tip provided with the same.It is essential to ensure that the plier has correct nose tip for the rivet to be placed.

 

Select the rivet diameter,open the riveting plier handles fully and insert the rivet until its head rests on the nose tip.Place the rivet into the work piece and squeeze the handles for a full stroke.If the rivet does not set the first time,open the handles and push the nose tip to the rivet head for another stroke.When the rivet is set,the stem will break away from the rivet head.Remove the stem from the plier by opening the handles fully.The stem will drop from the back of the plier.  The head of the plier can be rotated in 360 degrees to enable riveting in all position of the job.